Each "arm" sticking out of the each of the
ring frames has a custom cut and fitted piece of G-10 under it.
|
Then each of
the pieces of G-10 and the arm is filleted, (kind of like thick frosting
out the hard corner) |
Finally 36 oz
of fiberglass cloth is applied over the fillets, G-10 and arms. |
Just another
shot showing one of the ring frames in place. |
Guy prepping
the bulkheads for the epoxy tabbing of the bulkheads |
The tabbing wetted
out and attached to bulkhead and hull. |
The tabbing for
the top of the bulkhead is done too. |
Each of the
bulkheads now connects completely to the hull, is tabbed and epoxied in place.
Much stronger than original. |
